MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Exmark Radius S-Series (48 in) — commercial: daily paid use and high acreage; 48-inch deck; gas powered
  • Gravely Z-STANCE 48 KAWASAKI — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 4 differences that matter most, from the published figures.
  1. Radius S-Series (48 in) holds 7 gal (26.5 L) of fuel; Z-STANCE 48 KAWASAKI holds 4.5 gal (17 L) of fuel, a 2.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  2. Radius S-Series (48 in) has a published top speed of 9 mph; Z-STANCE 48 KAWASAKI has a published top speed of 7 mph, a 2 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  3. Radius S-Series (48 in) lists at $7,199; Z-STANCE 48 KAWASAKI lists at $8,199, a $1,000 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  4. Radius S-Series (48 in) has a 23 hp engine; Z-STANCE 48 KAWASAKI has a 22 hp engine, a 1 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
calculated figures and what isn’t comparable

Calculated by MowerFacts

  • Radius S-Series (48 in) works out to 3.5 acres/hour; Z-STANCE 48 KAWASAKI works out to 2.7 acres/hour, a 0.8 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Weight: not published for Radius S-Series (48 in).
  • Fuel Type: not published for Radius S-Series (48 in).
  • Deck Material: not published for Radius S-Series (48 in).
  • Deck Construction: not published for Radius S-Series (48 in).
  • Drive System: not published for Radius S-Series (48 in).
  • Discharge: not published for Radius S-Series (48 in).

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower · more Exmark · more Gravely
Side-by-side specifications: Exmark Radius S-Series (48 in) vs Gravely Z-STANCE 48 KAWASAKI
Spec Radius S-Series (48 in)
Exmark · Commercial
Z-STANCE 48 KAWASAKI
Gravely · Commercial
List price $7,199$8,199
Engine
Power Source gas gas
Engine Make Kawasaki FR691 Kawasaki®
Displacement 44.3 ci (726 cc) 44.3 ci (725.9 cc)
Engine Power 23 hp 22 hp
Fuel Type — Gas
Engine Model — FS651V
Deck
Cutting Width 48 in (1219 mm) 48 in (1219 mm)
Deck Material — 10 ga
Deck Construction — Fabricated X-Factor® 3
Deck Gauge — 10
Discharge — Side
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 5 in (127 mm) 5 in (127 mm)
Drive
Ground Speed 9 mph 7 mph
Drive System — Hydro-Gear® ZT-3100® Transaxles
Reverse Speed — 3 mph
Dimensions
Weight — 744 lbs (337.5 kg)
Fuel Capacity 7 gal (26.5 L) 4.5 gal (17 L)

Radius S-Series (48 in): Specs verified against the manufacturer spec sheet on Jun 6, 2026 — exmark.com.

Z-STANCE 48 KAWASAKI: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — gravely.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction