Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Gravely PRO-STANCE 48 KAWASAKI — commercial: daily paid use and high acreage; 48-inch deck; gas powered
- Wright Stander X 48 FX730E — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 4 differences that matter most, from the published figures.
- PRO-STANCE 48 KAWASAKI has a Fabricated X-Factor® 3 deck; Stander X 48 FX730E has a Floating-side discharge deck.
- PRO-STANCE 48 KAWASAKI holds 9 gal (34.1 L) of fuel; Stander X 48 FX730E holds 8 gal (30.3 L) of fuel, a 1 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- PRO-STANCE 48 KAWASAKI has a published top speed of 9 mph; Stander X 48 FX730E has a published top speed of 9.5 mph, a 0.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- PRO-STANCE 48 KAWASAKI weighs 875 lbs (396.9 kg); Stander X 48 FX730E weighs 900 lbs (408.2 kg), a 25 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What PRO-STANCE 48 KAWASAKI's weight means for a trailer ›
calculated figures and what isn’t comparable
Calculated by MowerFacts
- PRO-STANCE 48 KAWASAKI works out to 3.5 acres/hour; Stander X 48 FX730E works out to 3.7 acres/hour, a 0.2 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Blades: not published for PRO-STANCE 48 KAWASAKI.
- Transmission: not published for PRO-STANCE 48 KAWASAKI.
- Drive System: not published for Stander X 48 FX730E.
- Discharge: not published for Stander X 48 FX730E.
- Start Type: not published for PRO-STANCE 48 KAWASAKI.
- Cut height range: not published for PRO-STANCE 48 KAWASAKI.
- Price: Stander X 48 FX730E is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | PRO-STANCE 48 KAWASAKI Gravely · Commercial |
Stander X 48 FX730E Wright · Commercial |
|---|---|---|
| List price | $10,699 | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki® | Kawasaki |
| Displacement | 44.3 ci (725.9 cc) | 44.3 ci (726 cc) |
| Engine Power | 23.5 hp | 23.5 hp |
| Engine Model | FX730V | FX730E |
| Fuel Type | Gas | Gasoline |
| Start Type | — | Electric |
| Deck | ||
| Cutting Width | 48 in (1219 mm) | 48 in (1219 mm) |
| Blades | — | 3 |
| Deck Material | 7 ga | 7 Gauge |
| Deck Construction | Fabricated X-Factor® 3 | Floating-side discharge |
| Deck Gauge | 7 | 7 |
| Min Cut Height | — | 1.5 in (38 mm) |
| Discharge | Side | — |
| Max Cut Height | — | 5.5 in (140 mm) |
| Drive | ||
| Transmission | — | Hydro |
| Ground Speed | 9 mph | 9.5 mph |
| Reverse Speed | 3 mph | 5.5 mph |
| Drive System | Hydro-Gear® ZT-3400 Transaxles | — |
| Dimensions | ||
| Weight | 875 lbs (396.9 kg) | 900 lbs (408.2 kg) |
| Fuel Capacity | 9 gal (34.1 L) | 8 gal (30.3 L) |
| Length | — | 65 in (1651 mm) |
| Width | — | 49 in (1245 mm) |
Where these models differ, explained
PRO-STANCE 48 KAWASAKI: Specs verified against the retailer listing on Jun 6, 2026 — cuttingedgelawn.com.
Stander X 48 FX730E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.