Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Hustler Turf X-RIDE — commercial: daily paid use and high acreage; 60-inch deck; gas powered
- Hustler Turf Diesel Z — commercial: daily paid use and high acreage; 72-inch deck
What’s different? The 5 differences that matter most, from the published figures.
- X-RIDE uses a Kawasaki FX820 EVO EFI engine; Diesel Z uses a Perkins engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- X-RIDE has a 34.5 hp engine; Diesel Z has a 25 hp engine, a 9.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- X-RIDE has a 60 in (1,524 mm) deck; Diesel Z has a 72 in (1,829 mm) deck, a 12 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- X-RIDE has a 50.2 ci (822 cc) engine; Diesel Z has a 69 ci (1,130 cc) engine, a 18.8 ci difference. Displacement is the engine's size, not its output. A larger engine is not necessarily a more powerful one.
- X-RIDE holds 12 gal (45.4 L) of fuel; Diesel Z holds 14.4 gal (54.5 L) of fuel, a 2.4 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
2 more differences, calculated figures
Other verified differences
- X-RIDE has a published top speed of 13 mph; Diesel Z has a published top speed of 11.5 mph, a 1.5 mph difference.
- X-RIDE weighs 1,570 lbs (712.1 kg); Diesel Z weighs 1,711 lbs (776.1 kg), a 141 lbs difference.
Calculated by MowerFacts
- X-RIDE works out to 6.3 acres/hour; Diesel Z works out to 6.7 acres/hour, a 0.4 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | X-RIDE Hustler Turf · Commercial |
Diesel Z Hustler Turf · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | diesel |
| Engine Make | Kawasaki FX820 EVO EFI | Perkins |
| Displacement | 50.2 ci (822 cc) | 69 ci (1130 cc) |
| Engine Power | 34.5 hp | 25 hp |
| Deck | ||
| Cutting Width | 60 in (1524 mm) | 72 in (1829 mm) |
| Min Cut Height | 1 in (25 mm) | 1 in (25 mm) |
| Max Cut Height | 5.5 in (140 mm) | 5.5 in (140 mm) |
| Drive | ||
| Transmission | Hydro-Gear® ZT-5400® | Tandem Hydro-Gear 21cc pumps with Parker TG wheel motors |
| Ground Speed | 13 mph | 11.5 mph |
| Drive Tire Size | 26 x 12 | — |
| Drive Type | Dual Hydrostatic | Dual Hydrostatic |
| Dimensions | ||
| Weight | 1570 lbs (712.1 kg) | 1711 lbs (776.1 kg) |
| Fuel Capacity | 12 gal (45.4 L) | 14.4 gal (54.5 L) |
| Commercial / Pro | ||
| Seat Type | Bolstered high back seat with padded arm rests & adjustable back | — |
| General | ||
| Warranty | 5 yr | 5 yr |
Where these models differ, explained
X-RIDE: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — hustlerturf.com.
Diesel Z: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — hustlerturf.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.