Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Kubota WHF15NC-48-2 — commercial: daily paid use and high acreage; 48-inch deck; gas powered
- Kubota F2510 — commercial: daily paid use and high acreage; 60-inch deck
What’s different? The 5 differences that matter most, from the published figures.
- WHF15NC-48-2 holds 5 gal (18.9 L) of fuel; F2510 holds 16.1 gal (61 L) of fuel, a 11.1 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- WHF15NC-48-2 weighs 789 lbs (357.9 kg); F2510 weighs 1,590 lbs (721 kg), a 801 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What WHF15NC-48-2's weight means for a trailer ›
- WHF15NC-48-2 has a published top speed of 6.5 mph; F2510 has a published top speed of 12.4 mph, a 5.9 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- WHF15NC-48-2 uses a Kawasaki FS541V engine; F2510 uses a Kubota D1105 engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- WHF15NC-48-2 has a 15 hp engine; F2510 has a 23.3 hp engine, a 8.3 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
5 more differences, calculated figures and what isn’t comparable
Other verified differences
- WHF15NC-48-2 has a 36.8 ci (603 cc) engine; F2510 has a 68.5 ci (1,123 cc) engine, a 31.7 ci difference.
- WHF15NC-48-2 has a Hydro-Gear ZT-2800 transmission; F2510 has a Kubota HST transmission.
- WHF15NC-48-2 runs on Gasoline; F2510 runs on Diesel.
- WHF15NC-48-2 has a 48 in (1,219 mm) deck; F2510 has a 60 in (1,524 mm) deck, a 12 in difference.
- WHF15NC-48-2 has Belt drive; F2510 has Shaft drive.
Calculated by MowerFacts
- WHF15NC-48-2 works out to 2.5 acres/hour; F2510 works out to 6.0 acres/hour, a 3.5 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Deck Material: not published for F2510.
- Cut height range: not published for F2510.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | WHF15NC-48-2 Kubota · Commercial |
F2510 Kubota · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | diesel |
| Engine Make | Kawasaki FS541V | Kubota D1105 |
| Displacement | 36.8 ci (603 cc) | 68.5 ci (1123 cc) |
| Engine Power | 15 hp | 23.3 hp |
| Fuel Type | Gasoline | Diesel |
| Deck | ||
| Cutting Width | 48 in (1219 mm) | 60 in (1524 mm) |
| Deck Material | Fabricated Fixed with Wear band | — |
| Deck Gauge | 10 | — |
| Min Cut Height | 1.4 in (35 mm) | — |
| Max Cut Height | 4.6 in (118 mm) | — |
| Drive | ||
| Transmission | Hydro-Gear ZT-2800 | Kubota HST |
| Ground Speed | 6.5 mph | 12.4 mph |
| Reverse Speed | — | 6.8 mph |
| Drive System | Belt | Shaft |
| Dimensions | ||
| Weight | 789 lbs (357.9 kg) | 1590 lbs (721 kg) |
| Fuel Capacity | 5 gal (18.9 L) | 16.1 gal (61 L) |
Where these models differ, explained
WHF15NC-48-2: Specs verified against the retailer listing on Jun 6, 2026 — allmachines.com.
F2510: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — pubkubota.kubota.ca.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.