MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Walker Walker Model C19 — commercial: daily paid use and high acreage; 48-inch deck; gas powered
  • Gravely Z-STANCE 48 KAWASAKI — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Walker Model C19 uses a Rehlko engine; Z-STANCE 48 KAWASAKI uses a Kawasaki® engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  2. Walker Model C19 has a 19 hp engine; Z-STANCE 48 KAWASAKI has a 22 hp engine, a 3 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  3. Walker Model C19 holds 4 gal (15.1 L) of fuel; Z-STANCE 48 KAWASAKI holds 4.5 gal (17 L) of fuel, a 0.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  4. Walker Model C19 cuts from 1 in (25 mm) to 4 in (102 mm); Z-STANCE 48 KAWASAKI cuts from 1.5 in (38 mm) to 5 in (127 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
  5. Walker Model C19 has a published top speed of 6.5 mph; Z-STANCE 48 KAWASAKI has a published top speed of 7 mph, a 0.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
2 more differences, calculated figures and what isn’t comparable

Other verified differences

  • Walker Model C19 has a 41.1 ci (674 cc) engine; Z-STANCE 48 KAWASAKI has a 44.3 ci (725.9 cc) engine, a 3.2 ci difference.
  • Walker Model C19 weighs 762 lbs (345.6 kg); Z-STANCE 48 KAWASAKI weighs 744 lbs (337.5 kg), a 18 lbs difference.

Calculated by MowerFacts

  • Walker Model C19 works out to 2.5 acres/hour; Z-STANCE 48 KAWASAKI works out to 2.7 acres/hour, a 0.2 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Transmission: not published for Z-STANCE 48 KAWASAKI.
  • Deck Material: not published for Walker Model C19.
  • Deck Construction: not published for Walker Model C19.
  • Drive System: not published for Walker Model C19.
  • Discharge: not published for Walker Model C19.
  • Price: Walker Model C19 is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower · more Walker · more Gravely
Side-by-side specifications: Walker Walker Model C19 vs Gravely Z-STANCE 48 KAWASAKI
Spec Walker Model C19
Walker · Commercial
Z-STANCE 48 KAWASAKI
Gravely · Commercial
List price dealer quote$8,199
Engine
Power Source gas gas
Engine Make Rehlko Kawasaki®
Displacement 41.1 ci (674 cc) 44.3 ci (725.9 cc)
Engine Power 19 hp 22 hp
Engine Model — FS651V
Fuel Type Gasoline (unleaded - 87 octane; 10% ethanol maximum) Gas
Deck
Cutting Width 48 in (1219 mm) 48 in (1219 mm)
Deck Material — 10 ga
Deck Construction — Fabricated X-Factor® 3
Deck Gauge — 10
Min Cut Height 1 in (25 mm) 1.5 in (38 mm)
Discharge — Side
Max Cut Height 4 in (102 mm) 5 in (127 mm)
Drive
Transmission Eaton Model 7 transmission with ductile cast iron final drive, Dual Hydrostatic; each wheel independently driven —
Ground Speed 6.5 mph 7 mph
Reverse Speed — 3 mph
Drive System — Hydro-Gear® ZT-3100® Transaxles
Dimensions
Weight 762 lbs (345.6 kg) 744 lbs (337.5 kg)
Fuel Capacity 4 gal (15.1 L) 4.5 gal (17 L)

Walker Model C19: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — walker.com.

Z-STANCE 48 KAWASAKI: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — gravely.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction