MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Walker Walker Model D21d — commercial: daily paid use and high acreage; 52-inch deck
  • Wright Stander X 52 FX730E — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Walker Model D21d uses a Kubota engine; Stander X 52 FX730E uses a Kawasaki engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  2. Walker Model D21d runs on Diesel (2-D); Stander X 52 FX730E runs on Gasoline. Fuel type sets what you buy and store; it is not a measure of power.
  3. Walker Model D21d holds 4.7 gal (17.8 L) of fuel; Stander X 52 FX730E holds 8 gal (30.3 L) of fuel, a 3.3 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  4. Walker Model D21d has a published top speed of 6.5 mph; Stander X 52 FX730E has a published top speed of 9.5 mph, a 3 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. Walker Model D21d cuts from 1 in (25 mm) to 4 in (102 mm); Stander X 52 FX730E cuts from 1.5 in (38 mm) to 5.5 in (140 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
2 more differences, calculated figures and what isn’t comparable

Other verified differences

  • Walker Model D21d has a 20.9 hp engine; Stander X 52 FX730E has a 23.5 hp engine, a 2.6 hp difference.
  • Walker Model D21d weighs 1,001 lbs (454 kg); Stander X 52 FX730E weighs 920 lbs (417.3 kg), a 81 lbs difference.

Calculated by MowerFacts

  • Walker Model D21d works out to 2.7 acres/hour; Stander X 52 FX730E works out to 4.0 acres/hour, a 1.3 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Blades: not published for Walker Model D21d.
  • Deck Material: not published for Walker Model D21d.
  • Deck Construction: not published for Walker Model D21d.
  • Start Type: not published for Walker Model D21d.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower · more Walker · more Wright
Side-by-side specifications: Walker Walker Model D21d vs Wright Stander X 52 FX730E
Spec Walker Model D21d
Walker · Commercial
Stander X 52 FX730E
Wright · Commercial
List price dealer quotedealer quote
Engine
Power Source diesel gas
Engine Make Kubota Kawasaki
Displacement 43.9 ci (719 cc) 44.3 ci (726 cc)
Engine Power 20.9 hp 23.5 hp
Engine Model — FX730E
Fuel Type Diesel (2-D) Gasoline
Start Type — Electric
Deck
Cutting Width 52 in (1321 mm) 52 in (1321 mm)
Blades — 3
Deck Material — 7 Gauge
Deck Construction — Floating-side discharge
Deck Gauge — 7
Min Cut Height 1 in (25 mm) 1.5 in (38 mm)
Max Cut Height 4 in (102 mm) 5.5 in (140 mm)
Drive
Transmission Dual Hydrostatic Eaton Model 7 transmission with ductile cast iron final drive, Each Wheel Independently Driven Hydro
Ground Speed 6.5 mph 9.5 mph
Reverse Speed — 5.5 mph
Dimensions
Weight 1001 lbs (454 kg) 920 lbs (417.3 kg)
Fuel Capacity 4.7 gal (17.8 L) 8 gal (30.3 L)
Length — 66 in (1676 mm)
Width — 53 in (1346 mm)

Walker Model D21d: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — walker.com.

Stander X 52 FX730E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction