MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Wright Stander Intensity 42 FX600E — commercial: daily paid use and high acreage; 42-inch deck; gas powered
  • Gravely PRO-STANCE 36 KAWASAKI — commercial: daily paid use and high acreage; 36-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Stander Intensity 42 FX600E has a Floating-side discharge deck; PRO-STANCE 36 KAWASAKI has a Fabricated X-Factor® 3 deck.
  2. Stander Intensity 42 FX600E has a 42 in (1,067 mm) deck; PRO-STANCE 36 KAWASAKI has a 36 in (914 mm) deck, a 6 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  3. Stander Intensity 42 FX600E holds 5.5 gal (20.8 L) of fuel; PRO-STANCE 36 KAWASAKI holds 6 gal (22.7 L) of fuel, a 0.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  4. Stander Intensity 42 FX600E weighs 740 lbs (335.7 kg); PRO-STANCE 36 KAWASAKI weighs 776 lbs (352 kg), a 36 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Stander Intensity 42 FX600E's weight means for a trailer ›
  5. Stander Intensity 42 FX600E has a 19 hp engine; PRO-STANCE 36 KAWASAKI has a 18.5 hp engine, a 0.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
1 more difference, calculated figures and what isn’t comparable

Other verified differences

  • Stander Intensity 42 FX600E has a published top speed of 8.2 mph; PRO-STANCE 36 KAWASAKI has a published top speed of 8 mph, a 0.2 mph difference.

Calculated by MowerFacts

  • Stander Intensity 42 FX600E works out to 2.8 acres/hour; PRO-STANCE 36 KAWASAKI works out to 2.3 acres/hour, a 0.5 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Blades: not published for PRO-STANCE 36 KAWASAKI.
  • Transmission: not published for PRO-STANCE 36 KAWASAKI.
  • Drive System: not published for Stander Intensity 42 FX600E.
  • Discharge: not published for Stander Intensity 42 FX600E.
  • Start Type: not published for PRO-STANCE 36 KAWASAKI.
  • Cut height range: not published for PRO-STANCE 36 KAWASAKI.
  • Price: Stander Intensity 42 FX600E is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower · more Wright · more Gravely
Side-by-side specifications: Wright Stander Intensity 42 FX600E vs Gravely PRO-STANCE 36 KAWASAKI
Spec Stander Intensity 42 FX600E
Wright · Commercial
PRO-STANCE 36 KAWASAKI
Gravely · Commercial
List price dealer quote$9,559
Engine
Power Source gas gas
Engine Make Kawasaki Kawasaki®
Displacement 36.8 ci (603 cc) 36.8 ci (603 cc)
Engine Power 19 hp 18.5 hp
Engine Model FX600E FS600V
Fuel Type Gasoline Gas
Start Type Electric —
Deck
Cutting Width 42 in (1067 mm) 36 in (914 mm)
Blades 2 —
Deck Material 7 Gauge 7 ga
Deck Construction Floating-side discharge Fabricated X-Factor® 3
Deck Gauge 7 7
Min Cut Height 1.5 in (38 mm) —
Discharge — Side
Max Cut Height 5 in (127 mm) —
Drive
Transmission Hydro —
Ground Speed 8.2 mph 8 mph
Reverse Speed 3.5 mph 3 mph
Drive System — Hydro-Gear® ZT-3100® Transaxles
Dimensions
Weight 740 lbs (335.7 kg) 776 lbs (352 kg)
Fuel Capacity 5.5 gal (20.8 L) 6 gal (22.7 L)
Length 70 in (1778 mm) —
Width 42.5 in (1080 mm) —

Stander Intensity 42 FX600E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.

PRO-STANCE 36 KAWASAKI: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — gravely.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction