Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Wright Stander X 48 FX730E — commercial: daily paid use and high acreage; 48-inch deck; gas powered
- Wright Stander X 52 FX730E — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 2 differences that matter most, from the published figures.
- Stander X 48 FX730E has a 48 in (1,219 mm) deck; Stander X 52 FX730E has a 52 in (1,321 mm) deck, a 4 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- Stander X 48 FX730E weighs 900 lbs (408.2 kg); Stander X 52 FX730E weighs 920 lbs (417.3 kg), a 20 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Stander X 48 FX730E's weight means for a trailer ›
calculated figures
Calculated by MowerFacts
- Stander X 48 FX730E works out to 3.7 acres/hour; Stander X 52 FX730E works out to 4.0 acres/hour, a 0.3 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Stander X 48 FX730E Wright · Commercial |
Stander X 52 FX730E Wright · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki | Kawasaki |
| Displacement | 44.3 ci (726 cc) | 44.3 ci (726 cc) |
| Engine Power | 23.5 hp | 23.5 hp |
| Engine Model | FX730E | FX730E |
| Fuel Type | Gasoline | Gasoline |
| Start Type | Electric | Electric |
| Deck | ||
| Cutting Width | 48 in (1219 mm) | 52 in (1321 mm) |
| Blades | 3 | 3 |
| Deck Material | 7 Gauge | 7 Gauge |
| Deck Construction | Floating-side discharge | Floating-side discharge |
| Deck Gauge | 7 | 7 |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 5.5 in (140 mm) | 5.5 in (140 mm) |
| Drive | ||
| Transmission | Hydro | Hydro |
| Ground Speed | 9.5 mph | 9.5 mph |
| Reverse Speed | 5.5 mph | 5.5 mph |
| Dimensions | ||
| Weight | 900 lbs (408.2 kg) | 920 lbs (417.3 kg) |
| Fuel Capacity | 8 gal (30.3 L) | 8 gal (30.3 L) |
| Length | 65 in (1651 mm) | 66 in (1676 mm) |
| Width | 49 in (1245 mm) | 53 in (1346 mm) |
Where these models differ, explained
Stander X 48 FX730E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Stander X 52 FX730E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.