Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Wright Stander X 52 FX730E — commercial: daily paid use and high acreage; 52-inch deck; gas powered
- Wright Stander B 32 FX600E — commercial: daily paid use and high acreage; 32-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Stander X 52 FX730E has a 52 in (1,321 mm) deck; Stander B 32 FX600E has a 32 in (813 mm) deck, a 20 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- Stander X 52 FX730E holds 8 gal (30.3 L) of fuel; Stander B 32 FX600E holds 5 gal (18.9 L) of fuel, a 3 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- Stander X 52 FX730E has a published top speed of 9.5 mph; Stander B 32 FX600E has a published top speed of 7 mph, a 2.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- Stander X 52 FX730E weighs 920 lbs (417.3 kg); Stander B 32 FX600E weighs 703 lbs (318.9 kg), a 217 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Stander X 52 FX730E's weight means for a trailer ›
- Stander X 52 FX730E has a 23.5 hp engine; Stander B 32 FX600E has a 19 hp engine, a 4.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
3 more differences, calculated figures
Other verified differences
- Stander X 52 FX730E cuts from 1.5 in (38 mm) to 5.5 in (140 mm); Stander B 32 FX600E cuts from 2 in (51 mm) to 5 in (127 mm).
- Stander X 52 FX730E has a 44.3 ci (726 cc) engine; Stander B 32 FX600E has a 36.8 ci (603 cc) engine, a 7.5 ci difference.
- Stander X 52 FX730E has 3 blades; Stander B 32 FX600E has 2 blades.
Calculated by MowerFacts
- Stander X 52 FX730E works out to 4.0 acres/hour; Stander B 32 FX600E works out to 1.8 acres/hour, a 2.2 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Stander X 52 FX730E Wright · Commercial |
Stander B 32 FX600E Wright · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki | Kawasaki |
| Displacement | 44.3 ci (726 cc) | 36.8 ci (603 cc) |
| Engine Power | 23.5 hp | 19 hp |
| Engine Model | FX730E | FX600E |
| Fuel Type | Gasoline | Gasoline |
| Start Type | Electric | Electric |
| Deck | ||
| Cutting Width | 52 in (1321 mm) | 32 in (813 mm) |
| Blades | 3 | 2 |
| Deck Material | 7 Gauge | 7 Gauge |
| Deck Construction | Floating-side discharge | Floating-side discharge |
| Deck Gauge | 7 | 7 |
| Min Cut Height | 1.5 in (38 mm) | 2 in (51 mm) |
| Max Cut Height | 5.5 in (140 mm) | 5 in (127 mm) |
| Drive | ||
| Transmission | Hydro | Hydro |
| Ground Speed | 9.5 mph | 7 mph |
| Reverse Speed | 5.5 mph | 3 mph |
| Dimensions | ||
| Weight | 920 lbs (417.3 kg) | 703 lbs (318.9 kg) |
| Fuel Capacity | 8 gal (30.3 L) | 5 gal (18.9 L) |
| Length | 66 in (1676 mm) | 66.5 in (1689 mm) |
| Width | 53 in (1346 mm) | 46 in (1168 mm) |
Where these models differ, explained
Stander X 52 FX730E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Stander B 32 FX600E: Specs verified against the retailer listing on Jun 7, 2026 — powerequipmentplus1.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.