Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Husqvarna Z460 — commercial: daily paid use and high acreage; 60-inch deck; gas powered
- Toro GrandStand 36 in. 15 hp 541cc — commercial: daily paid use and high acreage; 36-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Z460 has a 60 in (1,524 mm) deck; GrandStand 36 in. 15 hp 541cc has a 36 in (914 mm) deck, a 24 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- Z460 has a 23 hp engine; GrandStand 36 in. 15 hp 541cc has a 15 hp engine, a 8 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- Z460 has a Steel deck; GrandStand 36 in. 15 hp 541cc has a 7 Gauge Steel deck.
- Z460 has Collect/Mulch/Side discharge discharge; GrandStand 36 in. 15 hp 541cc has Rubber discharge.
- Z460 has a published top speed of 10 mph; GrandStand 36 in. 15 hp 541cc has a published top speed of 8 mph, a 2 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
3 more differences, calculated figures and what isn’t comparable
Other verified differences
- Z460 cuts from 1.5 in (38 mm) to 4.5 in (114 mm); GrandStand 36 in. 15 hp 541cc cuts from 1 in (25 mm) to 5 in (127 mm).
- Z460 holds 6 gal (22.7 L) of fuel; GrandStand 36 in. 15 hp 541cc holds 7.8 gal (29.5 L) of fuel, a 1.8 gal difference.
- Z460 has a 44.3 ci (725.9 cc) engine; GrandStand 36 in. 15 hp 541cc has a 36.8 ci (603 cc) engine, a 7.5 ci difference.
Calculated by MowerFacts
- Z460 works out to 4.8 acres/hour; GrandStand 36 in. 15 hp 541cc works out to 2.3 acres/hour, a 2.5 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Transmission: not published for GrandStand 36 in. 15 hp 541cc.
- Fuel Type: not published for Z460.
- Deck Construction: not published for Z460.
- Drive System: not published for Z460.
- Start Type: not published for Z460.
- Price: GrandStand 36 in. 15 hp 541cc is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Z460 Husqvarna · Commercial |
GrandStand 36 in. 15 hp 541cc Toro · Commercial |
|---|---|---|
| List price | $9,799 | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki | Kawasaki |
| Displacement | 44.3 ci (725.9 cc) | 36.8 ci (603 cc) |
| Engine Power | 23 hp | 15 hp |
| Cylinders | 2 | — |
| Engine Model | FS Series V-Twin | — |
| Fuel Type | — | Gasoline |
| Start Type | — | Electric |
| Deck | ||
| Cutting Width | 60 in (1524 mm) | 36 in (914 mm) |
| Blades | 3 | 3 |
| Deck Material | Steel | 7 Gauge Steel |
| Deck Construction | — | 7-gauge 36" (91 cm) TURBO FORCE® with bull-nose bumper |
| Deck Gauge | — | 7 |
| Anti-Scalp Rollers | Yes | — |
| Min Cut Height | 1.5 in (38 mm) | 1 in (25 mm) |
| Blade Tip Speed | — | 18497 ft/min (5638 m/min) |
| Discharge | Collect/Mulch/Side discharge | Rubber |
| Cut Positions | 13 | — |
| Max Cut Height | 4.5 in (114 mm) | 5 in (127 mm) |
| Drive | ||
| Transmission | Hydrostatic | — |
| Ground Speed | 10 mph | 8 mph |
| Drive Tire Size | — | 18 in. x 8.5 in. - 8 in. (46 cm x 22 cm - 20 cm) |
| Drive Type | — | Pumps 10cc rev Wheel Motors 10 cir |
| Drive System | — | Pumps 10cc rev Wheel Motors 10 cir |
| Dimensions | ||
| Weight | 823 lbs (373.3 kg) | 837 lbs (379.7 kg) |
| Fuel Capacity | 6 gal (22.7 L) | 7.8 gal (29.5 L) |
| Length | 76.5 in (1943 mm) | 77.2 in (1962 mm) |
| Width | — | 49 in (1245 mm) |
| Height | 49 in (1245 mm) | 52 in (1321 mm) |
| Commercial / Pro | ||
| Frame Construction | — | 3 in. x 1.5 in. x 12 gauge (7.6 cm x 3.8 cm x 12 gauge) |
| Seat Type | Professional | — |
| General | ||
| Product Use | — | Commercial |
Where these models differ, explained
Z460: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
GrandStand 36 in. 15 hp 541cc: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — toro.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.